Video Transcript

1. [00:01] Fix the absence and tear a city or front city of the vehicle.
2. [00:05] Adjusting the tightness of screw can adjust the direction of the lens.
3. [00:12] Press the number key corresponding to the channel off.
4. [00:15] The motor control tone lags every decanel.
5. [00:18] Press enter key of the remote to control.
6. [00:20] And screen displays band area of bling zone.
7. [00:23] For lens of the for encloser 0, 1, 2, 3, and for correspond.
8. [00:29] Press the number key 0, 1, 2, 3, and for inter-remotor control.
9. [00:35] Respectively, press the number key 0 off the remote to control to.
10. [00:39] Select boolean, telum range in front of st.
11. [00:42] And press up and down direction key 0 for remote to control to adjust the position.
12. [00:47] Press the number key 1 off the remote to control to select baller border line.
13. [00:51] And press the left and right direction key 0 for remote to control to adjust the position.
14. [00:56] So far I low line AIs aligned with the vehicle.
15. [00:59] Press 2, 3, and for key 0 for remote to control to select the yellow and green lines.
16. [01:06] Sadi alam range.
17. [01:07] Respectively, use the up and down arrow key 0.
18. [01:10] Select the upper and lower position point so for color line.
19. [01:13] And press the left and right key 0 just for position.
20. [01:18] Press enter to serve.
21. [01:22] Calibration complete.

Auto-generated transcript via speech recognition; may contain errors, for reference only.