Video Transcript

  1. [00:00] MDVR office testing steps.
  2. [00:03] One, testing essential items, please prepare these things before testing.
  3. [00:11] To open MDVR, open the device with the key.
  4. [00:19] Three, loading card.
  5. [00:21] Insert the SD card, hard drive, or SIM card into the machine.
  6. [00:28] After installing the card, close and lock for accessory connection.
  7. [00:33] Find camera connection cable, connect camera.
  8. [00:37] Find the monitoring screen connection cable, connect monitoring,
  9. [00:41] connect 4G antenna, connect GPS antenna.
  10. [00:47] 5 power on, use power supply equipment to power MDVR,
  11. [00:52] voltage 8 to 36 volt.
  12. [00:58] Connect the black wire to the power ground wire.
  13. [01:02] Connect the red and yellow wires to the live wire.
  14. [01:10] Connect the power cord to the MDVR.
  15. [01:15] If other power supply equipment is used,
  16. [01:17] this connection is also possible.
  17. [01:19] Six, debugging.
  18. [01:21] In the remote control at the IR of MDVR,
  19. [01:25] press enter on the remote control,
  20. [01:27] according to the steps displayed on the screen.
  21. [01:31] According to your SIM card configuration here.
  22. [01:34] Finally, press give directional key.
  23. [01:36] Press continuously for three times.
  24. [01:39] This content appears successfully launched.

Auto-generated transcript via speech recognition; may contain errors, for reference only.